The warm/hot shower is often the highlight of the day where people have the opportunity to relax, but when nothing but cold water comes out of the shower head, it can make for a rather uncomfortable experience. Not only is it startling, stepping into a shower and realizing the water is not getting hot is frustrating too. Being that it is a major inconvenience and rather disagreeable, having nothing but cold water indicates there is a plumbing system problem. With this in mind, we at M&C Orsack Plumbing would like to continue discussing this subject. In the event you are stuck with cold water in the shower, there are a few places you can check to get to the bottom of the problem. If you are experiencing cold water in the shower, below are some helpful troubleshooting tips.

Check Sink Water Temperature

You need to know if the cold water problem is limited to just your shower or if it’s affecting the whole house. Throughout the home, test out the hot water of other tubs or sink faucets. Should the other faucets seem to be operating efficiently, the concern is likely just with the shower. After you conduct this quick inspection, you can move on to one of the next two areas.

Test Shower Valve

Should other faucets around the home have hot water, you know the problem is specific to the shower. In many cases, a faulty shower valve is what you are likely dealing with. This element of your plumbing combines the hot and cold water before it comes out of the showerhead. When the small parts, such as the O-ring or washer, wear out over time and use, the valve can be made to stop working correctly.

Do You Have Limited Hot Water in House?

Before you get too concerned, consider how much hot water was used in your home recently. Prior to the unit running out and needing a refill, there is a limited supply of hot water, in the event you have a tank water heater. Should a few members of the household recently take showers, or a hot-water appliance is running, wait about 30 minutes and then try the shower again.

Evaluate Water Heater

In the event the cold-water situation seems to be affecting the entire house, you are due to find your water heater. Ensure the pilot light is on and make sure the temperature is set appropriately, which should be around 120°F. Should you notice any leaks or strange sounds coming from the unit, contact a professional plumber right.

Emergency Plumbing Repairs & More in Spring, The Woodlands, Magnolia, Montgomery & Conroe Texas

There can be a number of sources to the issue that we can help you pinpoint and get the problem repaired should you be having problems with your hot water coming from the shower or all over the home. To help you restore the hot water back inside your Greater Spring, Texas home, call us today to get started and let our M&C Orsack Plumbing and let our trained and experienced plumbers assist you.