The water pressure regulator is a part of the plumbing of your home. It is actually a valve that is used to help control the amount of water that is coming into the house from the main water source. This type of valve is used to control the upstream and the downstream of a liquid such as water but the same type of valve can be found on a gas or steam appliance or fixture as well. This valve is extremely important because it is what will slow the water down to an optimal speed and pressure before it gets to your sinks, toilets, refrigerator, bathtub, shower and any other appliance that uses a water line. If the water pressure regulator is not working properly and controlling the amount of water it can send too much water in and that can lead to a plumbing leak. A pluming leak can then lead to water damage that can affect your home and your personal belongings.
Orsack Plumbing Company Explains Everything You Need to Know About Your Water Pressure Regulators
How to Find Your Water Pressure Regulator Or Valve: The water pressure regulator will be placed where the pipe is that brings the water to your home. The main water line is coming from the street and brings water to your home that is then regulated by the water district. You are only charged for the water that comes to your house and is used. The water regulator will be on the line after the main shut off valve. This is the valve that you can turn when you need to shut the water off to your home for an emergency or repair. Many homes have this valve in their garage somewhere along the wall.
How Does The Water Pressure Regulator Work: The water that is coming in from the street or main water line is not controlled by a valve to regulate the pressure. The valve that is in your home is there to help ensure that your plumbing fixtures are not damaged by too much water flowing to them. The regulator has a spring diaphragm that will allow water to fill up the body of the regulator. The water then is restricted to allow a specific amount of water into the line for use inside the home.
Bad Water Pressure Regulator Symptoms: The pressure regulator is just like any other piece of plumbing equipment. It is going to need repair of replacement at some point. One way you can tell your valve is no longer working is when the water starts hammering at the valve. This can sound like you are blocking the house quickly and allowing spurts of water out at a time. It may even be a loud pounding sound. You may also notice that the pressure coming from your faucets has changed to less or even more pressure.
Plumbing Repairs & Replacement Including Water Pressure Regulators in Spring, The Woodlands, Magnolia, Montgomery & Conroe Texas
This is a main valve that allows the water from the street to your home. It is not recommended that you replace this valve on your own because of the tools and equipment that is needed to do it properly. It is best to hire a professional plumber to come out and replace the valve for you. Orsack Plumbing Company can meet all your plumbing needs!
